is a very important part in many electronic projects. It is used as a visual indicator to show the status of the circuit or system. In this project, we will use the Arduino to control a LED to flash on and off.
The Arduino is a microcontroller board that can be used to control a wide range of electronic devices. In this project, we will use an Arduino to control a LED to flash on and off. The Arduino will be connected to a computer via a USB cable. The computer will send a signal to the Arduino to turn the LED on or off.
Quick Summery:
- Clap to flash light on/off : Flash LED are Total Install on Mobile 2537632+
- Clap to flash light on/off : Flash LED are Devolop By SRP infosoft
- Install Clap to flash light on/off : Flash LED Your PC Using Bluestacks Android Emulator
- This Apps Last Update On Jul 30, 2020
Clap to flash light on/off : Flash LED Andorid App Summary
SRP infosoft is the developer of this Clap to flash light on/off : Flash LED application. It is listed under the Lifestyle category in the Play Store. There are currently more than 2537632+ users of this app. The Clap to flash light on/off : Flash LED app rating is currently 1.7. It was last updated on Jul 30, 2020. Since the app cannot be used directly on PC, you must use any Android emulator such as BlueStacks Emulator, Memu Emulator, Nox Player Emulator, etc. We have discussed how to run this app on your PC, mac, or Windows with this emulator in this article.
Features of Clap to flash light on/off : Flash LED for PC
1. Clap to turn flashlight on and off.
2. Flashlight turns on with a clap.
3. Useful when you can’t find your phone.
4. Flashlight turns on with a clap in the dark.
5. Clap to turn flashlight on/off: MV Flash LED.
6. Free to use.
7. Share with others!
How To Install Clap to flash light on/off : Flash LED For PC
Follow the simple instructions below to easily install and download Clap to flash light on/off : Flash LED on your PC:
- Download the Bluestacks Android emulator from the link above
- Once the download is complete, run the .exe file to begin the installation
- Bluestacks can be successfully installed by following the on-screen instructions
- Launch Bluestacks once it has been installed
- Bluestacks will ask you to sign in; you can use your Gmail ID to sign in
- Now, look for the search bar and in the dialog box, type Clap to flash light on/off : Flash LED and press Enter
- Click on the most appropriate app from the search results to expand it
- Start the installation process by clicking the Install button
- Wait for the installation to complete
- Now launch the Clap to flash light on/off : Flash LED andorid App within the emulator and enjoy
System Requirements
| App Name | Clap to flash light on/off : Flash LED |
| Developer | SRP infosoft |
| Latest Version | 1.7 |
| android Version | 4.0.3 |
| Category | Lifestyle |
| Package name | com.srpinfosoft.Claptoflashlightonoff |
| Download | 2537632+ |
| Rating | 3.2 |
| Updated on | Jul 30, 2020 |
| Get it On | https://play.google.com/store/apps/details?id=com.srpinfosoft.Claptoflashlightonoff |
Clap to flash light on/off : Flash LED App Overview and Details
This quick project shows you how to use a clap sensor to toggle a LED on and off. You’ll need:
– an LED
– a 330 ohm resistor
– a clap sensor
– a breadboard
– some jumper wires
1. Connect the clap sensor to the breadboard. Connect one leg of the resistor to the breadboard and the other leg of the resistor to the anode (longer leg) of the LED. Connect the cathode ( shorter leg ) of the LED to the GND rail on the breadboard.
2. Connect the clap sensor to the Arduino. Connect the positive leg of the clap sensor to pin 5 of the Arduino and the negative leg of the clap sensor to GND.
3. Upload the following code to the Arduino.
void setup() {
pinMode(5, OUTPUT);
}
void loop() {
if (digitalRead(5) == HIGH) {
digitalWrite(5, LOW);
delay(500);
digitalWrite(5, HIGH);
delay(500);
}
else {
digitalWrite(5, HIGH);
}
}
Whats New In this Clap to flash light on/off : Flash LED?
+ New Features Add.
+ Candle Light Effect
+ Traffic signal Light
+ Disco Light
+ Disco Strobe Light
+ Bike,Car,Jeep Siren Light
+ Clap to Flash Light
+ Improve Performance
+ Fix Many Bugs
Hence we are updating app regularly to improve app features and performance.
Conclusion
Clap to FlashLight is a great application that turns your device into a flashlight. It is very easy to use and it is perfect for emergencies.
